Pressure Washers

Paddock™ pressure washers use a gearbox reduction between the motor and the pump allowing the pump to operate at a lower speed, running cooler and lasting much longer. Paddock™ hot water pressure washers run their pumps below 1600 rpm resulting in exceptional operating life even in extreme conditions. Each pump also comes with thermal protection on its head which protects the unit if elevated temperatures are reached.

Standard inclusions include quality Italian designed pumps which are CNC machined from forged brass with ceramic coated pistons and stainless steel valves. German PARKER packing, quality bearings and zinc alloy con-rods are just some of the reasons these pumps are so reliable.  A high level of quality control results in a superior final pump which outperforms imitations.

Genuine 3600 PSI and 17 LPM

When selecting a pressure washer people often obsess with peak operating pressure however in reality what's important is a good balance of pressure and flow. The Paddock™ units have been coupled to a pump which not only produces very high discharge pressure, but also a strong flow rate of water. Having high amounts of water at pressure is what ultimately sets commercial quality pressure washers apart from the light duty domestic units. Rather then confusing users with lots of variants, the best all round unit is offered making the decision easy.

Ample Hot Water to 93°C

These washers run a high quality North American boiler and burner system which works quickly and efficiently to heat the water. Diesel fuel is used in the burner with a 12v control system which monitors the ignition and temperature to ensure a safe operation. A simple dial is used to set your washer temperature.

See the burner unit in operation via this link.

Using a pressure washer with hot water makes an incredible difference to the overall performance. Hot water helps to break down dirt and grease, speeding up the time to clean machinery and plant. There is no comparison in performance between cold and hot water washers and if you're doing the tough jobs, hot water is a necessity.

Quality Engines - Petrol or Diesel Solutions

Paddock™ have packaged this pressure washer with quality engine partners to offer best in class engine solutions;

The genuine Honda GX 390 engine ensures reliable starting and trouble free performance. These commercial series engines are world renowned for delivering smooth operation with a nation wide service and support network.

HAILIN is a well established diesel engine brand with global presence. With over 20 yrs of production experience they build a quality diesel engine suitable for commercial applications. Parts and servicing are easily to access in Australia making this a ideal engine option for those needing a diesel hot water washer solution.

Dual Electric turn key starter with recoil backup makes starting a breeze even if you find yourself with a flat battery.

Beware of Chinese Honda engines which do not meet the demanding EU quality standards and do not have approval for import and distribution in Australia. Paddock™ only partner with Genuine Honda engines.

Standard Components and Extras

The Paddock™ build quality in these units is exceptional and the extras which come as standard features are impressive.

Integrated hose reel ensures your hose is kept in excellent condition and neatly stored when not in use. Each washer comes with 15m of hose however the reels are oversized and capable of holding up to 30m meaning upgrades are possible if ever desired. Sometimes it's just nice to have spare reel capacity meaning the hose easily fits without having to wind it on perfectly.

Non mark hoses as standard - cheap washers can leave behind black scuff marks which is never appreciated. The Paddock™ range use 10mmm, steel wire braided hoses with a non mark outer coating. These hoses have a 4x over pressure on the burst pressure rating making them extremely long lasting and durable.

Quality Dual Lance Spay Gun assembly - Rated to pressures up to 5000 psi and high temperatures, the standard spray gun on the Paddock™ units is over engineered and industrial quality. Built with brass, stainless steel and reinforced plastics, these guns stand up to the daily abuse they get. The dual lance design allows a soap nozzle or other to be fitted for faster changes between cleaning and blasting!

Range of spray nozzles and upgrades - Each unit comes standard with the common 5 head colour coded nozzle kit which delivers different stream options from 0 degree cutting through to 40 degree wide washing as well as the black soap tip ideal for pre-blasting chemical applications.

Also included with every washer is a brass turbo head. The turbo heads are great for cleaning mildew off concrete, mud off trucks, plus many other applications. Turbo heads work by concentrating the flow into a 0 degree nozzle equivalent however the spray actually rotates due to the nozzles internal moving parts which allows a larger area to be contacted. The result is a very powerful jet which contacts a larger area, offering exceptional cleaning characteristics.

The Paddock™ pressure washers come with galvanised steel frames with a top powder coating. What good is a quality engine and pump if the frame it mounts on corrodes away? The galvanised steel frames match the life of the other components ensuring a robust all round package.

A lifting point is integrated into the frame making loading on to utilities, trailers and high rise building constriction sites a breeze. The four wheel stability of this design is ideal for a range of terrains and environments.